Energy Speaker Systems HomeTheater System - Manual (Page 5)

Energy Effects speakers are designed with the necessary dipole radiation pattern in the
critical mid to high frequency range (400Hz - 20 kHz). In addition they also feature
unusually deep bass response not found in conventional dipole speaker designs, adding
further impact and realism to the film’s special effects.
NOTE: The unique shape of the RVSS cabinet allows versatility in placement, in
either side wall or rear corner locations.
ES Series Powered Subwoofers (Optional):
Low frequencies are essentially non-directional, so your subwoofer may be placed
anywhere in the listening room without significantly affecting the stereo image of your
main speakers. However, low frequency response and output level are somewhat
effected by placement in the room, and you should experiment with positioning to
obtain the best performance. For example, placement too near the corner of the
room may result in “boomy” bass performance. Having the subwoofer further from
the corner will normally result in more detailed and accurate performance.
If you are using a pair of ES-series Subwoofers in stereo, it is preferable to place each
subwoofer adjacent to the main front speaker of the same channel.
Selection of Connecting Wire:
We recommend the use of heavy gauge, high quality speaker wire to obtain optimum
performance from your Home Theater system speakers. Speaker wire that consists of
high quality silver or copper will normally provide best results.Your Energy dealer can
recommend the wire type that is best suited for these speakers.
o w n e r s m a n u a l H o m e T h e a t e r S y s t e m s
4
RIGHT
SURROUND SPEAKER
LEFT
SURROUND SPEAKER
“
NULL AXIS
”
“
NULL AXIS
”
RVSS AND LISTENER SHOWING NULL & DIPOLE
RADIATION PATTERN