Rvss wall mounting procedures – Energy Speaker Systems HomeTheater System User Manual

Page 7

Advertising

o w n e r s m a n u a l

H o m e T h e a t e r S y s t e m s

UPPER

SHOULDER BOLT

LOWER

SHOULDER BOLD

MOUNTING

SCREWS AND ANCHORS

NOT SUPPLIED

SELF ADHESIVE

RUBBER HALF SPHERES

RVSS WALL MOUNTING PROCEDURES

THESE INSTRUCTIONS HAVE BEEN EXPRESSLY DEVELOPED FOR THE SAFE

AND SECURE MOUNTING OF THE ENERGY RVSS SURROUND SOUND SPEAKER

WITH THE DOUBLE KEY-WAY MOUNTING BRACKET SUPPLIED.

The RVSS mounting bracket should be installed following recognized

construction standards and practices. Contact Energy Loudspeakers

or obtain professional assistance if you have any questions about

the proper mounting method.

Select the desired location on the wall where the RVSS speaker

is to be mounted. See page 2 of this owner's manual for optimum

placement recommendations.

Using the double key-way bracket as a template, mark the three

screw hole locations on the wall.

Be sure you have selected the appropriate mounting hardwar

(toggle screws, anchors, etc.) for the type of wall material involved.

If possible, mount the double key-way bracket directly into a wall stud.

Next affix the bracket to the wall surface using the appropriate hardware

you have selected.

IMPORTANT: BE SURE TO MOUNT THE BRACKET WITH THE LARGE

KEY-WAY OPENINGS AT THE TOP.

Lay the RVSS speaker on its front face, and use a Phillips screwdriver

to fasten the upper and lower shoulder bolts into the two threaded

metal inserts (see figure 1).

Place two self-adhesive rubber half spheres in the lower edge of

the terminal assembly (see figure 1). These will provide stability

for the speaker and protect the surface of the wall.

Connect the speaker wires to the red (positive) and black (negative)

binding posts as described in

“Connecting your RVS Home Theater

Speakers

” section of your owners manual.

Lift the speaker into mounting position, aligning the shoulder bolts

on the RVSS with the tip openings of the brackets' double key-ways.

Then allow the speaker to slide down into the locked position in the

key-ways. Double check to make certain both shoulder bolts are

engaged in the key-ways.

DOUBLE "KEYWAY" BRACKET

PLEASE NOTE ORIENTATION!

................................................ .............................................. ............................................

. .

.............................................. ................................................ ................................................ ................................................

.... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... ....

. .

Advertising

Popular Brands

Popular manuals