Setting up a wsd port (windows 7) – Epson ES-580W Wireless Duplex Document Scanner User Manual
Page 78
78
4.
Select
Memory Device
.
5.
Change any of the displayed settings on the
Basic Settings
tab as necessary.
6.
Select the
Advanced
tab to view and change additional scan settings, if necessary.
Note:
Tap the
icon if you want to save your settings as a preset.
7.
Tap the
icon and check the scanner settings or make changes, if necessary.
8.
Select the
start icon to start scanning.
Your product scans your original and saves the scanned file to the external USB device.
Parent topic:
Setting Up a WSD Port (Windows 7)
You can scan to a networked Windows computer using WSD (Web Services for Devices). You must first
set up a WSD port on your Windows 7 system (the port is set up automatically on Windows 10 and
Windows 8.x).
Before you set up a WSD port, make sure you installed your product software, and connected your
product and computer to the same network.
1.
Turn on your product.
2.
Click
and select
Computer
.
3.
On the left side of the window, select
Network
.
4.
Locate your product on the Network screen, right-click it, and select
Install
.
5.
When you see the User Account Control screen, click
Continue
.
Note:
If you see an Uninstall screen, click
Uninstall
and repeat these steps as necessary.
6.
When you see the message
Your device is ready to use
in the Windows taskbar, click the
message.
7.
On the Driver Software Installation screen, make sure your product is listed as
Ready to use
. Then
click
Close
.
8.
Click
and select
Devices and Printers
.
9.
Make sure that an icon appears for your product's name on the network.