GIGABYTE M28U AE-SA 28" 4K HDR 144 Hz Gaming Monitor - Manual (Page 21)

- 21 -
Gaming Monitor User Guide
Installing a Wall-Mount Bracket (Optional)
Use only the 100 x 100 mm wall mount kit recommended by the
manufacturer.
1. Push the locking latch to release the lower hooks on the arm from
the mounting slots on the rear of the monitor. Then lift the monitor
to release it from the upper hooks on the arm. Remove the monitor.
2. Attach the mounting bracket to the mounting holes at the rear of
the monitor. Then use the screws to secure the bracket in place.
DP HDMI-2 TYPE-C USB 3.0 HDMI-1
100 mm
100 mm
Note: To mount the monitor on the wall, refer to the installation guide that is
included in the wall-mount bracket kit.