Electrolux 12830 - Manual (Page 15)

The countdown is updated every hour and by 30 min-
utes the last 2 hours.
• Alarm code indicating a fault in the machine opera-
tion (see page 38).
Programme progress display
By selecting the wash programme, the pilot lights corre-
sponding to the various phases making up the programme
come on.
After the machine has started, only the running phase pilot light stays
on. When the programme has finished, the END pilot light comes on.
Cancelling a programme
To cancel a programme which is running, turn the programme selector
dial to the
O/OFF position.
Warning! After a programme which ends with water in the drum
(RINSE HOLD option), turn the selector dial first to
O and then to the
DRAIN, SPIN or DELICATE SPIN programme.
Altering an option which is running
To alter an option, first set the machine to PAUSE by pressing the
START/PAUSE button.
Any option can be modified before the machine starts it. After select-
ing the new option press the START/PAUSE button again to re-start the
selected programme.
To modify the selected programme turn the programme selector dial to
O/OFF and then choose a new programme.
The water is not emptied out and after pressing the START/PAUSE but-
ton again the machine restarts with the newly selected programme.
15
Description of the appliance
RINSE
EXTRA RINSE
SPIN
DRYING
END
DOOR
PREWASH
WASH
132984010.qxd 24/06/2005 16:30 Pagina 15