Extra rinse, Selection of the extra rinse option, Selection of the delay start option – Electrolux 12830 User Manual

Page 27: Selection of the no buzzer option

Advertising
background image

27

How to wash

EXTRA RINSE

This appliance is designed for saving water. However, for people with
a very delicate skin (allergic to detergents) it may be necessary to
rinse the laundry using an extra quantity of water (extra rinse).

The extra rinse is available only with the cotton, easy care and deli-
cates.

Selection of the EXTRA RINSE option

Press simultaneously SPIN SPEED and DRYING TIME buttons for about
3 seconds: the EXTRA RINSE light in the programme progress display
comes on.
This function stays permanently on. To remove it press SPIN SPEED
and DRYING TIME buttons again until the EXTRA RINSE light comes
off.

Selection of the DELAY START option

To delay starting of a programme, press the DELAY START button
before starting the machine. The figures corresponding to the
selected delay will be displayed for about 3 seconds, after which the
duration of the selected programme will appear on the display.
When the START/PAUSE button is pressed, the selected delay will
appear again on the display and the machine starts its countdown.

Selection of the NO BUZZER option

Press simultaneously TIME SAVER and SPIN SPEED buttons s for about
3 seconds: the acoustic signal is deactivated at the end of the cycle,
when selecting the programmes and in case of an incorrect option
selection .
By depressing these 2 buttons again the acoustic signal is reactivated.

132984010.qxd 24/06/2005 16:30 Pagina 27

Advertising