Nikon NIKKOR Z 28mm f/2.8 (SE) Lens - Manual (Page 8)

8
A Attachment and Removal Attachment and Removal
Attaching the Lens
z Turn the camera off, remove the body cap, and detach the
rear lens cap.
x Position the lens on the camera body, keeping the mount-
ing mark on the lens aligned with the mounting mark on
the camera body, and then rotate the lens counterclockwise
until it clicks into place.
Removing the Lens
z Turn the camera off.
x Press and hold the lens release button while turning the
lens clockwise.
When Shooting When Shooting
The focus position may change if you turn the camera off and then
on again after focusing. If you have focused on a pre-selected location
while waiting for your subject to appear, we recommend that you do
not turn the camera off until the picture is taken.
Using the Lens on Cameras with a Built-in Flash Using the Lens on Cameras with a Built-in Flash
Shadows may be visible in photos where light from the built-in flash is
obscured by the lens.
• For the latest information on focal lengths and subject distances at
which shadows will not appear in photos taken with a built-in flash,
visit the site below.
https://downloadcenter.nikonimglib.com/