Nikon NIKKOR Z 400mm f/2.8 TC VR S Lens - Manual (Page 33)

Using the Built-in Teleconverter: Notes
• To ensure correct exposure and prevent vignetting or other unintended results,
do not use the teleconverter switch while any of the following are in progress:
Autofocus
Vibration reduction
Exposure
Video recording
AF fine-tuning
• Note that incorrect focal length data may be recorded with photographs taken
with a built-in or optional teleconverter.
Focus Position
• Using the teleconverter switch after focusing may cause the focus position to
change. When shooting after using the teleconverter switch, be sure to refocus
before releasing the shutter.
• The focus position will also change if you use the teleconverter switch after
recalling a stored focus position. Store the focus position after operating the
teleconverter switch.
The Built-in Teleconverter
33
-
-
-
-
-