EverFocus Speed Dome EPTZ3000I - Manual (Page 25)

2-24
Note: The camera module on the mechanical part is very sensitive. Please be
careful when installing this part.
7. Remove the lens protection cover before installing the bulb. Screw the connection
wire to the housing in order to prevent the bulb from being drop down. Align the 2
buttons on the bulb base with the 2 buttons on the housing, and push bulb base to clip
the housing.
GLOVE
Connection wire Button
Button
Note: In order to protect the bulb from dirt and scrape, please put on the gloves before
installing the bulb.
8. Turn on the power, and start to operate the EPTZ3000I.