Sennheiser ACCENTUM Over-Ear Wireless Headphones (Black) - Manual (Page 17)

Using the headphones
ACCENTUM | 17
Switching the connection to paired
Bluetooth devices/“Connections”
To selectively switch the audio connection to paired Bluetooth
devices using the “Connections” function, you require the Smart
Control app (> 18).
▷
In the Smart Control app, tap “Connections”.
The list of Bluetooth devices paired with the headphones
appears.
▷
From the list, select the paired device to which you want to con-
nect the headphones. Make sure that the desired device is
switched on and Bluetooth is activated.
The Bluetooth audio connection between the desired Bluetooth
device and the headphones is established.
The app connection between the device with the Smart Control
app installed and the headphones remains active (only Bluetooth
Low Energy for communication between app and headphones,
the device name is highlighted in bold).
Disconnecting the headphones from a
Bluetooth device
▷
Via the menu of your Bluetooth device, disconnect the connection
to the headphones.
The headphones are disconnected from the Bluetooth device.
You hear the voice prompt “No connection”. The headphones
switch to standby mode.
The “Connections” function also allows you to selectively
delete pairing information of devices without resetting the
headphones to the factory default settings.
To delete the Bluetooth pairing list of the headphones: > 37.