FujiFilm EF-60 Shoe Mount Flash - Manual (Page 21)

Remote shooting method
When attaching this unit to a metal accessory shoe, be careful
not to short-circuit the contacts.
Attach the commander to the camera and turn on the
power.
• Install the remote flash (EF-60)
anywhere.
• Perform a test flash of the commander
flash or commander to check the
synchronization of the remote flash.
• Shooting is possible once the remote
flash is synchronized.
* Maximum No. of flashes that can be paired around the subject is
30 pcs.
* The power turns off after 60 minutes by the remote auto power off
function.
* It does not switch to power saving mode when remote.
* Remote tuning may not be possible depending on the location of
this unit.
Remote
Flash1
Remote
Flash3
Attached to the camera
EF-W1 or EF-X500
Remote Flash2
Important