Inserting batteries – FujiFilm EF-X500 Flash User Manual

Page 20

Advertising
background image

13

1

Getting Star

ted

Inserting Batteries

The fl ash takes four AA alkaline or nickel-metal hy-
dride (NiMH) batteries (Ni-MH batteries are rec-
ommended for increased endurance and shorter
charging times).

O

Replace all four batteries at the same time, using fresh or ful-

ly-charged batteries of the same brand and type. The rubber
gasket inside the cover prevents water entry; if the unit is wet,
dry it thoroughly before opening the cover and remove any
droplets on or around the gasket.

1

Press the area around the top of
the cover down slightly and then
continue sliding the cover down
to open it.

O

Before opening the cover, be sure the power switch is in the

OFF

position.

2

Insert four AA batteries in the ori-
entation shown on the inside of
the cover.

O

Failure to insert the batteries in the correct orientation could

result in malfunction.

3

Close the cover.

O

Be careful that the cover does not

catch the black dust-/water-resistant
gasket.

Advertising