Kodak Pro Image 100 Color Negative Film (35mm Roll Film, 36 Exposures, 5-Pack) - Manual (Page 3)

KODAK PROFESSIONAL PRO IMAGE 100 Color Negative Film
•
E-4L 3
CURVES
Characteristic Curves
LOG EXPOSURE (lux-seconds)
3.0
0.0
2.0
DENSITY
1.0
2.0
3.0
4.0
1.0 0.0 1.0
Densitometry:
Exposure:
Process: C-41 Daylight
Status M
B
G
R
F009_0052AC
Spectral-Sensitivity Curves
F009_0055AC
700 750 650 600 550 500 450 400 350 300 250
*Sensitivity = reciprocal of exposure (erg/cm ) required
to produce specified density
WAVELENGTH (nm)
2
LOG SENSITIVITY
0.0
*
1.0
2.0
3.0
4.0
Status M
1/50 second
Process:
Effective Exposure:
Densitometry:
C-41
Density: 0.2 above D-min
Yellow-
Forming
Layer
Magenta-
Forming
Layer
Cyan-
Forming
Layer
Spectral-Dye-Density Curves
NOTICE: The sensitometric curves and data in this publication represent product tested
under the conditions of exposure and processing specified. They are representative of
production coatings, and therefore do not apply directly to a particular box or roll of
photographic material. They do not represent standards or specifications that must be met
by Eastman Kodak Company. The company reserves the right to change and improve
product characteristics at any time.
F009_0053AC
500
0.0
400
WAVELENGTH (nm)
600
DIFFUSE SPECTRAL DENSITY
1.0
0.5
2.0
1.5
2.5
700
Typical densities for a midscale neutral subject
and D-min.
C-41 Process:
Midscale Neutral
Minimum Density