Hikvision DS-K2M061 Secure Door Control Unit - Manual (Page 12)

Chapter 4 Installation
Before installing the secure door control unit, please set the DIP switch and connect it with the
cable.
4.1 DIP Switch Description
Refer to Appearance Introduction for the position of DIP switch. DIP switch description is as shown
in the following figure. No. 1 to 4 in the figure are switch No.
Figure 4-1 DIP Switch Description
DIP switch meaning is as shown in the following table.
Table 4-1 DIP Switch Meaning
Icon Meaning
Represent 0 in binary mode
Represent 1 in binary mode
As shown in the figure below, the binary number represented by the DIP switch 1234 is 0011,
which is the decimal address: 3.
DS-K2M061 Secure Door Control Unit User Manual
6