Bosch VG4-A-PSU1 Power Supply Unit for CCTV Cameras User Manual
Bosch Video surveillance systems
Advertising
Table of contents
Document Outline
- Table of contents
- 1 Safety
- 2 Unpacking
- 3 Description
- 4 Pre-installation Check List
- 5 Mount Power Supply Box (Wall, Mast (Pole), and Corner Mounts)
- 6 Attach Cover Door to Power Supply Box
- 7 Route Wires and Attach Connectors
- 8 Wiring the Power Supply Box
- 9 Video and Control Cables (AUTODOME VG5-600 Camera Models ONLY)
- 9.1 Using Coaxial Cable to Transmit Video and Control
- 9.2 Using UTP to Transmit Video and Control
- 9.3 Using Ethernet to Transmit Video and Control
- 9.4 Using Multi-mode Fiber Optic to Transmit Video and Control
- 9.5 Using a Fiber Optic Ethernet Media Converter to Transmit Video and Control
- 9.6 Controlling the AUTODOME via Biphase
- 9.7 Controlling the AUTODOME via the RS232 Protocol
- 9.8 Controlling the AUTODOME via the RS-485 Protocol
- 10 Fiber Optic Module with an RS232/RS422 Controller (AUTODOME VG5-600 Camera Models ONLY)
- 11 Audio Cables (AUTODOME Cameras ONLY, except VG5-600 Models)