Planar Systems PT3270Q 31.5" 1440p Multi-Touch Monitor - Manual (Page 10)

8
Quick Installation
1.
2.
3.
4.
Connect either USB-C to USB-C, DP, or HDMI Video Source from the monitor to the
computer. If connecting USB-C only , see Fig 1. If connecting DP or HDMI inputs,
please also connect the USB-A to TYPE-C Cable, see Fig 2.
Connect the power cord to a properly grounded AC outlet, then to the monitor.
Power-ON computer and then POWER-ON the monitor.
Set the timing mode on your computer. Recommended resolution and refresh rate is
2560x 1440@60Hz.
Figure 1:
Figure 2:
Power Cord
DP Cable
TYPE-C to TYPE-C Cable
Power Cord
HDMI Cable
USB-A to TYPE-C Cable