Power Vision PowerEgg X Wizard Waterproof AI Camera & Drone - Manual (Page 2)

1
EN
PowerEgg TM X Waterproof Case
The waterproof case and its rubber seal strip protect PowerEgg X from water
damage in humid environments, rain and other circumstances that may cause water
damage.
The waterproof case only works with Drone mode. Do not use it in AI-Camera
mode.
• Precautions and maintenance
1. Keep the rubber seal strip of the waterproof case intact and clean. Any dirt or
foreign object (including but not limited to sand, dust, hair, or thin thread) may
cause water damage to the aircraft.
2. Before installing the waterproof case, ensure that there are no water drops or mist
inside the waterproof case or on the surface of the aircraft.
3. In case of contact with seawater or othercorrosive liquid, wash the waterproof case with fresh water and wipe it dry;
otherwise, hinges, buckles, heat sinks, and other metals will corrode, and the rubber strip seal will suffer from salt
deposition, causing aircraft failures.
4. Do not remove the rubber seal strip. If cleaning is required, wash it with water and then shake off water drops.
When wiping the rubber seal strip, avoid getting dirt or hair stuck in it.
5. If an aircraft arm accidentally comes into contact with seawater, wash it with fresh water, shake off water drops, wipe
its surface dry, and air it out.
6. The waterproof case only prevents rain and water splashes. Do not soak the waterproof case and aircraft arms in
water for a long time. If the aircraft falls into water accidentally, take it out immediately.
7. Waterproof protective shell may affect the optical imaging quality and create problems including glare, reflection,
and slight distortion, which are considered as normal phenomenon.