Power Vision PowerEgg X Wizard Waterproof AI Camera & Drone - Manual (Page 5)

4
EN
After the aircraft starts, the metal heat sinks at the tail of the waterproof case will heat up. Do not touch
them.
• Troubleshooting
1. Foggy lens
As the aircraft is completely sealed after the waterproof case is installed, it will lead to fog inside the waterproof case
if the aircraft flies in a humid environment.
2. Solutions
(1) Before installing the waterproof case, use a piece of dry, soft cloth to clean water drops inside the case.
(2) Before installing the waterproof case, apply goggle anti-fogging agents to the inner surface of the case. Refer to
the anti-fogging agent instructions for use.
Warning