Extron electronic MLP 101 AAP - Manual (Page 3)

SPECIFICaTIONS
Specifications are subject to change without notice.
VCM 100 AAP VCM 100 MAAP
Audio
Gain ................................................ Adjustable, +25 dB to + 72 dB
Frequency response ........................ 20 Hz to 20 kHz, ±0.1 dB
THD + Noise (with a 10 Hz to 80 kHz
bandwidth filter)
0.03% when input is -48 dBV and output
is +4 dBu.
0.14% when input is -60 dBV and output
is -10 dBV
S/N ................................................. 92 dB at maximum output (unweighted,
with a 10 Hz to 80 kHz bandwidth filter)
CMRR ............................................. >70 dB @ 20 Hz to 20 kHz
Low cut filter ................................... 75 Hz (18 dB per octave)
Equivalent input noise ..................... <126 dBV (unweighted, with a 10 Hz to
80 kHz bandwidth filter)
Audio input
Number/signal type ........................ 1 mono, balanced
Connectors
MLP 101 ...................................... (1) 3.5 mm captive screw connector, 3 pole
MLP 101 AAP, MLP 101 D ............ 1 female 3-pin XLR
Impedance ...................................... 2k ohm balanced
Nominal level .................................. -60 dBV or -48 dBV
Maximum level ............................... -1.5 dBu, (balanced) at 1% THD+N
NOTE: 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
Audio output
Number/signal type ........................ 1 mono, balanced
Connectors ..................................... (1) 3.5 mm captive screw connector, 3 pole
Impedance ...................................... <150 ohms balanced
Maximum level (Hi-Z) ..................... >+25 dBu, balanced at 1% THD+N
Maximum level (600 ohm) .............. >+20 dBu, balanced at 1% THD+N
Control/remote — preAmp
Contact closure ............................... (1) 3.5 mm captive screw connector, 3 pole
Contact closure pin configurations .. 1 = 10 VDC reference voltage
2 = variable voltage input for remote
volume control/muting
3 = ground
Extron remote key pad control ........ (1) 3.5 mm captive screw connector, 3 pole
GenerAl
External power supply ..................... 100 VAC to 240 VAC, 50/60 Hz, external,
autoswitchable; to 12 VDC, 1 A, regulated
Power input requirements ............... 12 VDC, 0.3 A
Temperature/humidity .................... Storage: -40 to +158 °F (-40 to +70 °C) /
10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) /
10% to 90%, noncondensing
Rack mount
MLP 101 ...................................... Yes, with optional 1U rack shelf,
part #60-190-01 or 60-604-01; or
VersaTools
® rack shelf, part #60-190-20 or
60-604-20; or back of the rack mount kit,
70-367-01. It is also furniture-mountable
with optional under-desk mounting
kit #70 212 01, or it can be attached to
a projector mount with optional
kit #70-217-01.
MLP 101 AAP ............................... Yes, with optional faceplate or frame
MLP 101 D ................................... No, but wall or furniture mountable in a
Decora -style opening
Enclosure type ................................. Metal
Enclosure dimensions
MLP 101 ...................................... 1.7" H x 2.2" W x 3.0" D
(1U high, one-eighth rack wide)
4.3 cm H x 5.6 cm W x 7.6 cm D
(Depth excludes connectors.)
MLP 101 AAP
Faceplate ................................... 1.4" H x 3.5" W x 0.1" D
(3.6 cm H x 8.9 cm W x 0.3 cm D)
(double space high AAP plate)
Device ........................................ 1.1" H x 2.75" W x 1.8" D
(2.8 cm H x 7.0 cm W x 4.6 cm D)
(Depth excludes connectors.)
MLP 101 D
Faceplate ................................... 2.6" H* x 1.3" W x 0.1" D
(6.6 cm H* x 3.3 cm W x 0.3 cm D)
(Fits the opening in a 1 gang Decora
faceplate.
*Height is 3.8" [9.7 cm] including
mounting tabs.)
Device ........................................ 2.75" H x 1.1" W x 1.8" D
(7.0 cm H x 2.8 cm W x 4.6 cm D)
(Depth excludes connectors.)
Product weight ............................... 0.3 lbs (0.1 kg)
Shipping weight .............................. 2 lbs (1 kg)
Vibration ......................................... ISTA 1A in carton (International Safe Transit
Association)
Listings ............................................ UL, CUL
Compliances ................................... CE, FCC Class A, VCCI, AS/NZS, ICES
MTBF .............................................. 30,000 hours
Warranty ......................................... 3 years parts and labor
NOTE: All nominal levels are at ±10%.
Model Version Description Part Number
Standard Version
MLP 101
Mic Preamp ............................................. 60-718-10
AAP Version
MLP 101 AAP
black ....................................................... 60-718-11
MLP 101 AAP white....................................................... 60-718-21
MLP 101 AAP RAL9010 white ........................................ 60-718-51
Decora ® Version
MLP 101 D black ....................................................... 60-822-12
MLP 101 D white....................................................... 60-822-22
Optional Accessories
AAP Module Version
VCM 100 AAP
Volume and Mute Controller ................... 70-396-0X
MAAP Module Version
VCM 100 MAAP Volume and Mute Controller ................... 70-397-0X