EchoStar 9630 LP - Manual (Page 18)

Store Satellite Position #1
1. Once locked onto a desired satellite, hold LEFT AND RIGHT
arrows simultaneously until display flashes.
2. Hold LEFT arrow until 1P (Position 1) appears on display.
Position #1 is stored in memory for this position.
Store Satellite Position #2
3. Once locked onto the second desired satellite, hold
LEFT AND RIGHT arrows simultaneously until
display flashes.
4. Hold RIGHT arrow until 2P (Position 2) appears on display.
Position #2 is stored in memory for this position.
Recall Satellite Position #1
5. Press DOWN AND LEFT arrows simultaneously.
Dish will automatically move to Satellite Position #1 and
controller will display 1P.
Recall Satellite Position #2
6. Press DOWN AND RIGHT arrows simultaneously.
Dish will automatically move to Satellite Position #2 and
controller will display 2P.
SECTION 5
STORE/RECALL POSITIONS
Note: For use with multi-satellite services. (such as Dish 500)
Page 16