Emerson PD6810 - Manual (Page 11)

10
Programmed playback enables tracks on a disc to be played in any desired order. Up to 20
tracks can be programmed.
Note : Programming can only be done when the player is in stop mode.
PROGRAMMED PLAYBACK
RANDOM PLAYBACK
This plays the songs on the disc in random order.
Note : Random playback can only be selected while the player is in the stop mode.
2
1.
1. Press the PROGRAM button.
“PRG” indicator and “00”
flashes in the display. 2. Press the /
button to select the desired
track number.
3. Press PROGRAM button
again to memorize the
track. 4. Repeat steps 2 and 3 until all desired tracks
are programmed.
5. Press the PLAY/PAUSE
button to start playback.
“PRG” indicator is flashing
in the CD display. 6. Press STOP button to
stop programmed playback.
The CD playback stops but
the program remains in the
memory.
7. Press PROGRAM and PLAY/
PAUSE buttons to
resume programmed
playback. 8. To clear the program memory, open the CD
door, change to Radio function or switch the
power “OFF”.
RDM
PLAY
Press the RANDOM button to
play the tracks in random
order. “PLAY” and “RDM”
indicators appear in the
display and play all the tracks
in random order. When all
tracks have been played, the
player stops and the display
shows the total tracks. .To cancel Random playback
press “STOP” button, the
display shows total tracks,
indicator of “PLAY” and “RDM”
disappear.
PD6810_103106.P65 31/10/2006, 10:06 10