Adjusting the sound listening to the radio – Emerson PD6810 User Manual

Page 9

Advertising
background image

8

Turn the knob to adjust the volume.

Using Headphones (Headphones not included)
Plug in headphones (3.5mm stereo mini-plug) to the PHONES jack on back cabinet. When
headphones are plugged in, the speaker is automatically disconnected.

Bass Booster
Slide X-BASS switch to the “ON” position for extra bass.

Note : to establish a safe level :

ADJUSTING THE SOUND

LISTENING TO THE RADIO

5. After listening, set the
FUNCTION switch to OFF
position.

3. Tune into the desired station
using the TUNING control.

1. Slide the FUNCTION switch to
the RADIO position, the POWER
LED will turn on.

2. Slide the BAND switch to the
desired band position (AM, FM or
FM ST.) that you want.

4. This indicator will light up when
you select FM ST. band and the FM
station is broadcasting in Stereo.

FOR BETTER RECEPTION

FM

AM

Extend the telescopic antenna.

Rotate the unit for best reception.

Start your volume control at a low setting.
Slowly increase the sound until you can hear it comfortably and clearly, and without distortion.

PD6810_103106.P65

31/10/2006, 10:06

8

Advertising