Canon PIXMA G5020 Wireless MegaTank Printer User Manual
Page 282
If you select
Network name(SSID)
and press the
OK
button, you can check the updated
identifier (SSID).
Change password
•
Manual setup
1. Select
Manual setup
and then press the
OK
button.
2. Enter new password and then hold down the
OK
button.
The password must be 10 characters long.
3. Select whether to decide your entries and then press the
OK
button.
•
Auto update
1. Select
Auto update
and then press the
OK
button.
2. Select
Yes
and then press the
OK
button.
3. Select
Done
and then press the
OK
button.
If you select
Security protocol
instead of
Done
, you can check the updated password.
Confirm request
To display the confirmation screen when a Wi-Fi Direct compatible device is connecting to the
printer, select
Yes
and press the
OK
button.
Important
• To prevent an unauthorized access, we recommend you should select the setting to display
the confirmation screen.
Note
• If you change the Wireless Direct setting of the printer, also change the wireless router setting of the
device.
282