Envision Peripherals L42H761 - Manual (Page 11)

9
PREPARATION
Please, make sure to connect the power plug to the wall outlet socket after connecting the
TV to the power cord!
1. Install the base stand; place the TV on a solid surface.
Ensure that the TV is placed in a position to allow free flow of air. Do not cover the
ventilation openings on the back cover.
To prevent any unsafe situations, no naked flame sources, such as lighted candles, should
be placed on or in the vicinity.
Avoid heat, direct sunlight and exposure to rain or water. The equipment shall not be
exposed to dripping or splashing.
2. Connect the antenna cable or CATV cable to the aerial socket ANT IN 75Ω at the back
of the TV set.
Min
1m
CABLE
English