Envision Peripherals L42H761 - Manual (Page 31)

29
Select the menu language
Press the MENU button on the remote control.
Use the cursor down to select Installation in the
Settings menu.
Use the cursor right to enter the Installation menu.
Select Language and enter the list of available
languages with the cursor right.
Select your preferred language with the cursor up/
down and press the OK button to confirm your
selection.
Proceed with the Installation menu.
1
2
3
4
5
6
Source
Select Source in the Installation menu.
Use the cursor right to enter the Source menu.
Select PC with the cursor up/down and press the
OK button to confirm your selection.
1
2
3
Picture adjustment
Select Picture adjustment in the Installation
menu.
Use the cursor right to enter the Picture adjust-
ment menu.
You can choose Auto adjust or Manual adjust
with cursor up/down and press OK button to
confirm.
1
2
3
Auto adjust
Automatically adjust to the best image position,
phase and clock setting.
Manual adjust
Manually fine tune the image as it appears on the
screen.
• Phase
Eliminates the horizontal interfering lines.
• Clock
Eliminates the vertical interfering lines.
• Horizontal
Adjust the horizontal placement of the picture.
• Vertical
Adjust the vertical placement of the picture.
Factory reset
Select Factory reset in the Installation menu.
Use the cursor right to enter the Factory reset
menu.
Press the OK button to erase settings and reset
them to their default values.
1
2
3
This function allows you to reset most of the pic-
ture and sound settings to their default factory
levels.
Note: Press SOURCE button on the remote control to make
sure the source is selected in PC mode.
Installation 4 3 Language
Factory reset
English
Français
Español
Select your menu language with the cursor up/down. Press the OK key
on the remote control to confirm.
Source
Language
Picture adjustment
Settings
Installation 4 8 Source
HDMI1
HDMI2
PC
TV
Factory reset
Here you can select the accessory devices you have connected to the
external inputs/outputs.
Source
Language
Picture adjustment
Settings
AV1
AV2
Component1
Component2
Installation 4 2 Picture adjustment
Manual adjust
Auto adjust
Factory reset
Here you can automatically or manually adjust to the picture of PC
mode.
Source
Language
Picture adjustment
Settings
Installation 4 Factory reset
Factory reset
This resets the setting to their predefined factory values.
Source
Language
Picture adjustment
Settings
Start now
PC menu-Installation
English