Brother QL-810W Ultra-Fast Label Printer with Wireless Networking - Manual (Page 65)

Changing the Label Printer Settings
55
4
Advanced Tab
4
The following explains about the Advanced Tab in the settings dialog box.
• Print Density (Black)
Sets the density of black.
Available settings: [
+6/+5/+4/+3/+2/+1/0/-1/-2/-3/-4/-5/-6 ]
• Print Density (Red)
Sets the density of red.
Available settings: [
+6/+5/+4/+3/+2/+1/0/-1/-2/-3/-4/-5/-6 ]
• Print Data after Printing
Specifies whether or not print data is erased after printing.
Available settings: [
Keep Print Data ], [ Erase All Print Data ]
• Printer Information Report
Selects the information you want to include in the Printer Information Report.
Available settings: [
All ], [ Usage Log ], [ Printer Settings ], [ Printer Transfer Data ]
• Auto Cut
Sets the cutting method when printing multiple labels.
Available settings: [
OFF ], [ Auto Cut ], [ Cut at End ] (Only cuts the places that have finished printing when
multiple labels are printed.)
• Serialize Mode
Available settings: [ Cont From Last ] (Select to serialize from the last number printed.), [ From Starting ]
(Select to serialize from the default number each time you print.)