Electrolux EW 1209 I - Manual (Page 11)

11
3. Measure out the fabric
softener
If required, pour fabric softener into the compartment
marked
(the amount used must not exceed the
“MAX” mark in the drawer).
Close the drawer gently.
4. Switch the machine on
Press the ON/OFF button to switch the machine on. The
display will show three blinking dashes or a blinking
zero. The light above the button will light up.
5. Select the required programme
Turn the programme selector dial until the pointer on
the knob coincides with the desired programme on the
control panel: the lights corresponding to the different
phases making up the selected programme light on.
The display shows the duration of the programme.
95 º E
60 º
40 º 30 º 40 º
30 º
40 º
X
30 º
50 º
40 º
30 º
60 º
50 º
---
0
P0005
Operating Sequence
Before the first wash, we recommend that you run a
cotton cycle at 60°C, without any laundry in the
machine, to remove any manufacturing residue from the
drum and tub.
Pour 1/2 a measure of detergent into the dispenser
drawer and start the machine.
Washing
1. Load the laundry
Open the door by pulling the catch outward.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible. Close the door.
2. Measure out the detergent
Pull out the dispenser drawer until it stops.
Measure out the amount of detergent required and pour
it into the main wash compartment
.
If you wish to carry out the prewash or the soak
programme, pour detergent into the compartment
marked .
P0006
P0004
132993670.qxd 1/13/03 3:24 PM Pagina 11 (Nero/Process Black pellicola)