Electrolux EW 1209 I - Manual (Page 12)

12
6.Select the spin speed or
option
Depress the spin speed button to choose the required
speed or Rinse hold option : the corresponding light
comes on.
7. Select the required option(s)
The light corresponding to the depressed button
illuminates.
7. Select the Delay Start
To delay starting of a programme, press the DELAY
START button. The corresponding light illuminates. The
figures corresponding to the selected delay will be
displayed for about 3 seconds, after which the duration
of the selected programme will appear on the display.
When the START/PAUSE button is pressed, the
selected delay will again appear on the display and the
machine starts its countdown.
1200
900
700
500
6. Start the programme
T o start the selected programme, press the
START/PAUSE button ; the corresponding light
stops flashing.
The pilot light corresponding to the wash phase which is
running is on.
The machine starts operating.
7. At the end of the programme
The machine stops automatically.
If the Rinse hold option has been selected, the light
of the START/PAUSE button flashes to indicate that
the water must be emptied out before opening the door.
A steadily lit zero appears on the display.
The door can only be opened when a flashing zero
appears on the display.
Release of the lock is also indicated by the coming on of
the light
.
Turn the programme selector dial to the X position.
Switch the machine off by pressing the ON/OFF button
.
Remove the laundry from the drum and carefully check
that the drum is empty so as to avoid any forgotten
items being damaged in a subsequent wash (e.g.
shrinking) or their colour running into a load of whites.
If you do not intend to carry out another wash, close the
water tap.
Leave the door open to prevent the formation of mildew
and unpleasant smells.
132993670.qxd 1/13/03 3:24 PM Pagina 12 (Nero/Process Black pellicola)