Esoteric X-01 D2 - Manual (Page 12)

12
Playback
Opening and closing the tray
1 5
2 4 3
Turn the unit on. 1
Each press of the POWER button turns the unit on and off.
The ring surrounding the POWER button and the display light
up when the unit is turned on.
Press the OPEN/CLOSE button. 2
The shutter opens and the disc tray slides out.
< The tray opens after a few seconds (this delay is normal and is
due to movement of the VRDS and other mechanisms within
the unit).
Insert the disc, label side up. 3
< Make sure the disc is centered in the tray in order to avoid
any malfunction or jamming of the tray or damage to the disc
itself.
Press the OPEN/CLOSE button again. 4
The disc tray and shutter close. Take care to avoid pinching
your fingers in the moving tray.
< The unit reads the disc, which takes some time due to the
reading and storing of the disc’s table of contents.
Press the PLAY button to start playback. 5
Pausing playback
Press the PAUSE button to pause playback (the ring
surrounding the PAUSE button on the main unit lights).
Press PLAY or PAUSE to restart playback.
Stopping playback
Press the STOP button (the ring surrounding the STOP button
on the main unit lights).
Pressing OPEN/CLOSE opens the tray if it is closed, and closes
it if it is open. When the tray is opened during playback, it
may take a few seconds before the disc is “unloaded” and
the tray opens.