Esoteric X-01 D2 - Manual (Page 16)

16
Changing the display mode
During playback, it is possible to change the display as shown
here.
< The DISPLAY button doesn’t work during programmed
playback.
Elapsed time of current track Currently playing track
Time remaining for current track
Total elapsed time (disc)
Total time remaining (disc)
Repeatedly press the MODE button to select the menu
item to be changed.
< If you leave the unit idle for 10 seconds, the setting mode will
be cancelled.
Use the SKIP buttons (.//) to select the options
within the menu item.
Individual menu functions are described on pages 17-18.
Repeatedly press the MODE button until the display
returns normal (or leave the unit idle for 10 seconds) to
exit the setup mode.
Pressing the STOP button also finishes the setup mode.
< Switching off the power without exiting the setup mode may
cause problems. Do not turn the unit off.
< Settings are stored even when power is turned off and the
unit is unplugged. If left unplugged for an extended period,
the settings may be lost.
3
2
WORD DAC LAYER
1
MODE
(normal display)