Huion Kamvas 22 Plus Pen Display - Manual (Page 23)

GS2202
23
EN
7.2 Possible Breakdowns Related to FUNCTIONS
Abnormal Phenomena Possible Solutions
There is no pressure in the
graphics software but the
cursor moves
You may have installed other display drivers or opened the drawing
software when installing the driver. Please uninstall all drivers and
close the drawing software, then reinstall the Huion driver. It's better
to restart your computer after finishing
the installation.
The pen does not work
1. Make sure you are using the pen that originally came with
your display.
2. Make sure you installed the driver correctly.
Press Keys does not
work
1. Make sure the Press Keys function was enabled in the driver.
2. Make sure you have correctly defined the Press Keys.
3. Check if the press lock switch is on the unlock position.
The computer can't
enter sleep mode When you are not using the display, please do not put the pen on the
display surface, which will keep the computer awake.
The side button of the pen
doesn't work
When pressing the side button, please make sure that the nib didn't
touch the display surface and the distance between the nib and
surface is within 10mm.
The side button of the pen
doesn't work Make sure the USB port is functional, if not, please change to another
USB port.
The computer can't
recognize the display Check that the USB port is normal. If there is any problem, please use
another USB port.