Efficient Networks SpeedStream 5100 Series - Manual (Page 34)

SpeedStream Router User Guide
26
To edit an existing port forwarding configuration:
1. On the main menu, click Advanced Setup, and then click Port Forwarding.
The Port Forwarding Configuration screen displays.
2. In the Current Port Forwarding Configuration table, click Edit in the row that you wish to
reconfigure.
The Add/Edit Entry data refreshes and displays the current configuration for the selected protocol.
3. Enter your changes (see Port Forwarding Configuration Options).
4. To save your settings, click Apply.
To delete an existing entry:
• In the Current Port Forwarding
Configuration table, click Delete in the
row that you wish to remove.
The entry is deleted, and the table
refreshes.
To delete all entries in the table:
• In the last row of the table, click Delete
All.
All port forwarding rules listed in the
Configured Ports table are deleted and
the table refreshes.
To add a port forwarding entry:
1. From the Choose Protocol list, select
TCP, UDP, ICMP, or GRE.
2. If you select TCP or UDP, select a service from the Choose Service list.
- or -
Enter a port number in the Port Number box.
3. If you want inbound traffic forwarded to the SpeedStream router, select Redirect selected
protocol/service to this router.
- or -
To enter a specific IP address, select Redirect selected protocol/service to IP Address and enter the
address in the text box.
4. To save your settings, click Apply.