Ericsson DIALOG 4220 - Manual (Page 69)

69 Dialog 4220 Lite/Dialog 4222 Office
Settings
Settings
Programming of function keys
Frequently used functions and phone numbers can be
programmed on the function keys for easy access. When you want
to use the function, just press the key. Certain functions must be
preprogrammed by your system administrator. Both phone
numbers and function codes can be programmed on a function
key.
Program or change a function Ô
Program Press. Ô
Press selected function key.
Note: If the key is already programmed, the number or
function will be displayed. z
Enter phone number or a function code according to the list
in section “Functions and required data”.
Note: If a wrong number is entered, press the Clear key to
erase it, and then enter the number again. Х Ф
Press the function key again. Х Ф
Program Press to finish programming.
Remove the transparent cover and write the function name or
phone number beside the key.