Elation Professional 216 - Manual (Page 12)

ELAR 216 Panel ™
©Elation Professional, Los Angeles Ca. 11 www.ElationLighting.com
10. Power Output Lead – This lead is used to jump power to another ELAR 216
Panel™. Please do not daisy chain power for more than 16 fixtures. To maintain the
integrity of the IP rating, only use proper Elation IP rated power cables.
11. Main Power Input Lead – This lead is the main power input lead. When the unit is
the first in a chain or the only fixture to be used, be sure to use the power starter
cable that converts a standard Edison 3-prong to the IP rated twist lock connector.
When jumping from fixture to fixture be sure to only use Elation IP rated power
connectors to maintain the IP rating.