Elation Professional 216 - Manual (Page 34)

ELAR 216 Panel ™
©Elation Professional, Los Angeles Ca. 33 www.ElationLighting.com
“DOWN” buttons to toggle through the scenes created in “Step 1.” Press the
“ENTER” button to add a scene to the program. Tapping the “Enter” button will
automatically lock the selected scene into the programs’ memory. Repeat the
process until all the desired scenes have been added to the program. Each program
can store a maximum of 64 scenes.
• To test the program access “Program Test” in the “Program Edit” menu function.
Step 3 – Playing a Program
To initiate a program follow the procedure below:
• Access the main menu and use the “Up” and “Down” to toggle to “Function Mode”
and tap the “Enter” button.
• In the next screen select “Auto Program” and tap the “Enter” button.
• There are now two selections, “Master” and “Alone.” Select “Master” when running
multiple fixtures in a master/slave configuration. See section 10.2 “Master/ Slave
Operation” on page 33 for proper set-up instructions. Select “Alone” when running a
single fixture or when multiple fixtures in stand-alone mode. See section 10.1
“Stand-Alone Operation” on page 32 for proper set-up instructions.
The 3 Slave groups run the Auto Program in certain time segments, as shown in the
following diagram: