EverFocus EQ600 WDII - Manual (Page 19)

17
MENU
8. SAVE/RESTORE
I. RESTOER USER SETTINGS
Restore the previous user settings from memory. Press SET button to restore user
setting.
II. SAVE USER SETTINGS
Save USER SETTINGS into the camera memory. Press SET button to save user
setting.
III. RESTOER FACTORY SETTINGS
Restore the default setting. Press SET button to restore factory setting. Please refer to
the Appendix-B for the default factory settings.
IV. RESET CAMERA
Restart the camera again. Press SET button to reset camera.
VI.MENU REV.0.1
Display the software version.
Note: The number will change by every time of the software change it’s not keep as this
manual.
SAVE/RESTORE
> RESTORE USER SETTINGS..
SAVE USER SETTINGS..
RESTORE FACTORY SETTINGS..
RESET CAMERA..
MENU REV. 0.1
PREVIOUS PAGE…
EWD600 MAIN MENU
PRESETMODE INDOOR…
CAMERA ID OFF
ADVANCED SETUP…
> SAVE/RESTORE…
EXIT MENU