Proaim 3-Stage PTZ Camera Support Stand with 5/8" Baby-Pin & Ball Head - Manual (Page 2)

2
Camera Support Stand Setup
 Stretch out the legs and secure them properly
with the help of knobs.
NOTE: The stand comes with spiked feet &
rubber shoes, that makes it fit to be used on
different surfaces with extra stability.
 Adjust the height of the stand by loosening the
top and bottom knobs and then tighten it
properly.
 Insert the feet into the legs and tighten them
properly.
 Loosen the top and bottom knobs as shown in
the image.
 Adjust the height of the PTZ-support stand
according to your requirement.