Proaim 3-Stage PTZ Camera Support Stand with 5/8" Baby-Pin & Ball Head - Manual (Page 3)

3
 Loosen the ball head's knob and mount it
properly on the 5/8" baby pin.
 By loosening the telescopic knob, adjust the
height of the stand and tighten the knob
properly.
 Properly tighten the knob, as shown in the
image.
 Loosen the knob of the ball head and remove
it.
NOTE: The Stand has 5/8" baby pin mount on
the top to attach the additional camera support
accessories.
NOTE: The support Stand has 3 sections to
adjust the height with quick & secure locking
knobs. The central main post of the stand is
adjustable, through which you can change its
height as per your requirement.