EverFocus EDSR 110 - Manual (Page 98)

88
Diagram 10.1
Connection Procedure:
 The First step is to purchase or make a cross over cable. We recommend purchasing one
if you have never made a cross over cable. Please remember you can not use a straight
through network cable for this application
 Once you have a cross over cable plug one end into the LAN port on the back of the
recorder and the other into the network card on the back of the computer.
 Now Log into the Everfocus DVR menu and using the jog dial from the previous chapter
go to the Network Setting Menu.
 Assign an IP address of 192.168.001.003 to the DVR, a Subnet mask of
255.255.255.000, and a default gateway of 192.168.001.001.
 The next step is to get the computer onto the same network to do this you will need
administrator access to your windows machine.
 To assign a static IP address in Windows 2000/XP.