Product overview, Description – Enterasys Networks VH-4802 User Manual

Page 15

Advertising
background image

9033630

Product Overview 1

1. PRODUCT OVERVIEW

This chapter provides the following information:

Product Description

Features

Front and Rear Panel Component Descriptions

Feature Summaries

Application Example

Description

This installation guide describes Enterasys Networks’ Vertical Horizon

VH-4802 Fast Ethernet switch. The switch provides 48

10Base-T/100Base-TX ports, plus two slots for optional slide-in

100Base-FX, 1000Base-SX or 1000Base-LX modules. There is also a

fixed SNMP-based management card included in the switch. This

management card supports both in-band and out-of-band access for

managing the switch.

The switch employs a high-speed switching fabric. This design allows for

simultaneous transport of multiple packets at low latency on all ports. It

also uses store-and-forward switching to ensure maximum data integrity.

In this mode, the entire packet must be received into a port buffer and

checked for validity before being forwarded. This prevents errors from

being propagated throughout the network. This switch also features full-

duplex capability on all ports, which effectively doubles the bandwidth of

each connection.

The switch can connect up to 48 end-node workstations or servers using

its 10Base-T/100Base-TX ports. Moreover, you can use a 100 Mbps fiber

module for connecting to a remote site, or a Gigabit module for a high-

speed backbone connection.

The RMON/SNMP/Web management card provides a broad range of

management options. It includes a standards-compliant Simple Network

Management Protocol (SNMP) agent. The SNMP agent allows network

management station applications to collect and present status and

performance information about the switch, as well as providing the ability

to configure and control functions in the switch. The management card

also supports Remote Monitoring (RMON) for Statistics, History, Alarm

and Event groups (Groups 1-3, 9).

Network management can be performed in-band using a TCP/IP or Telnet

connection to the switch. This card also includes a built-in Web agent that

provides management access via common http browsers such as

Netscape Navigator and Microsoft’s Internet Explorer. In addition, the

console port allows out-of-band management using a PC, terminal, or

modem connection.

ELS100-48tx2m.book Page 1 Thursday, November 16, 2000 4:59 PM

Advertising