Vivotek FD9388-HTV 5MP Outdoor Network Dome Camera with Night Vision User Manual
Page 391
VIVOTEK
User's Manual - 391
© 2019 VIVOTEK INC. All Right Reserved
258
PARAMETER
VALUE
DESCRIPTION
"capability_camctrl_c<0~(n-1)>_buildinpt" is "1"
getmintiltangle <integer>
Get the lower limit for tilt angle.
*Only available when bit1 of
"capability_camctrl_c<0~(n-1)>_buildinpt" is "1"
getmaxtiltangle <integer>
Get the upper limit for tilt angle.
*Only available when bit1 of
"capability_camctrl_c<0~(n-1)>_buildinpt" is "1"
getminzoom
0, <positive integer> Get the lower limit for zoom position.
getmaxzoom
0, <positive integer> Get the upper limit for zoom position.
getmaxdzoom 0, <positive integer> Get the upper limit for digital zoom position.
getmaxratio
<decimal>
Get the maximum ratio of optical zoom.
* We support this parameter when the version number
(getversion) is equal or greater than 5.0.0.14
getmaxdratio
<decimal>
Get the maximum ratio of digital zoom.
* We support this parameter when the version number
(getversion) is equal or greater than 5.0.0.14
getminfocus
0, <positive integer> Get the lower limit for focus position.
getmaxfocus
0, <positive integer> Get the upper limit for focus position.
8.29 Recall
(capability_camctrl_c<0~(n-1)>_zoommodule = 1)
Note:
This request requires Viewer privileges.
Method:
GET
Syntax:
http://<
servername
>/cgi-bin/viewer/recall.cgi?
recall=<value>[&channel=<value>][&return=
<return page>
]
PARAMETER
VALUE
DESCRIPTION
recall
string[30]
One of the present positions to recall.
channel
0~"
capability_nvideoin"-1
Channel of the video source.
© 2019 VIVOTEK INC. All Right Reserved
259
8.30 Preset Locations
(capability_camctrl_c<0~(n-1)>_zoommodule = 1)
Note:
This request requires Operator privileges.
Method:
GET/POST
Syntax:
http://<
servername
>/cgi-bin/operator/preset.cgi?[channel=<value>]
[&addpos=<value>][&delpos=<value>][&return=
<return page>
]
PARAMETER
VALUE
DESCRIPTION
addpos
string[30]
Add one preset location to the preset list.
channel
0~"capability_nvideoin"-1 Channel of the video source.
delpos
string[30]
Delete preset location from preset list.
return
<return page>
Redirect to the page <return page> after the parameter
is assigned. The <return page> should be the relative
path according to the root of camera. If you omit this
parameter, it will redirect to an empty page.
* If the <return page> is invalid path, it will ignore this
parameter.