Edimax Technology BR-6004 - Manual (Page 23)

-22-
Appendix A Console Mode
When you forget the system password or the IP address of this product, you need enter
console mode to reset them.
Before invoking the console program, be sure to find a null modem cable and use it to
connect from this product’s COM port to your computer’s COM port. Then, execute a
terminal program, such as the Hyper Terminal of MS Windows 95. The connection
parameters should be set to 19200 8-N-1. And, reboot this product. When the M1 indicator
starts flashing regularly, you can press the “Enter” key of the keyboard several times,
there should be some messages and console prompt ">" appeared in the terminal.
In the console mode, you may reset the IP address and the system password of this
product. Please remember to execute the SR command to save the changes you have made.
For example,
IP 192.168.123.254
PW admin
SR