Edimax Technology BR-6004 - Manual (Page 9)

-8-
Figure 2-3 Setup of LAN connections for this product.
2. Setup WAN connection: prepare an Ethernet cable for connecting this product to
your cable/xDSL modem or Ethernet backbone. Figure 2-4 illustrates the WAN
connection.
Figure 2-4 Setup of WAN connections for this product.
3. Power on:
Connecting the power cord to power inlet and turning the power switch on, this
product will automatically enter the self-test phase. When it is in the self-test phase,
the indicators Ready and COM will be lighted ON for about 5 seconds, and then
Ready and COM will be flashed 3 times to indicate that the self-test operation has