Evo Fitness EVO2 - Manual (Page 12)

EVO2 MOTORIZED TREADMILL
Visit us at: www.evofitness.com
12
ASSEMBLY
STEP 3:
NOTE: Please follow these instructions before attaching the Console Tray (29).
Run the Cd Player Wires from the back of the Computer (1) first through the small hole on the Console Tray (29), then
through the tabs on the back of the Console Tray (29) and finally through the small hole on the side of the Computer (1) as
shown in FIG-3.
Attach the Cross Brace (25) to the Left and Right Uprights (26 and 27) using two
M8 x 80mm Allen Head Bolts (21) and two
Metal Caps (22). Do not fully tighten the M8 x 80mm Allen Head Bolts (21). Insert the Console Support Tube (30) into the
bottom of the Console Tray (29). Attach the Console Support Tube (30) to the Cross Brace (25) using one M8 x 25mm
Screw (24). Do not fully tighten the M8 x 25mm Screw (24). Insert the Console Tray (29) into the back of the Computer (1)
and secure using one M5 x 12mm Screw (28). Now fully tighten the M8 x 25mm Screw (24) and
M8 x 80mm Allen Head
Bolts (21).