Evo Fitness EVO2 - Manual (Page 23)

EVO2 MOTORIZED TREADMILL
Visit us at: www.evofitness.com
23
COMPUTER OPERATION
60 MINUTE WALK
When the computer is in POWER ON status press the 60 MINUTE WALK button on the console then press the START button
to start the program. If no buttons are pressed within 3 minutes the program will return to POWER ON status. At this time the
LED 60 MINUTE WALK button will light up. The TIME counts down from 60:00, and the other information will count up until
the treadmill stops. The SPEED and INCLINE level follow the preset program.
During exercise press STOP to pause the program. The Speed and Incline Level will return to the beginning levels while the
other information (Time, Distance, Calories) is paused. To recall values and resume exercising press START. Pressing the
STOP button again within 30 seconds returns all data to zero and the computer returns to POWER ON status. If no buttons
are pressed within 30 seconds the computer automatically returns to POWER ON status and all data returns to zero.
During the exercise changes in both SPEED and INCLINE follow the preset program. You can still press the SPEED
UP/DOWN and INCLINE UP/DOWN to change the program. Any change only effects the current workout period. The
computer does not record any changes for future use on this program.
HEART RATE CONTROL
When the computer is in the POWER ON status, press the HEART RATE CONTROL button on the console.
USER AGE SET UP
The AGE LED will light up and show the preset age of 35. Press INCLINE UP/DOWN to set the user age then press ENTER.
If you do not press the INCLINE UP/DOWN button or do not press ENTER to confirm the age within 30 seconds, the AGE
LED will start blinking for 5 seconds in 30 second intervals to alert you. If you do not want to continue this program, press the
STOP button to return to the POWER ON status. When you press the SPEED button to set the age, the heart rate LED will
show the target heart rate along with the user age.