Ericsson ENMMP-X210 - Manual (Page 16)

ENMMP-X210 - User Guide
16
Chapter 5: Frequently Asked Questions
Q1. How to do the firmware upgrade?
A1.
1. Please download the latest firmware file
from our website if available.
2. Please unzip the firmware file to USB flash
drive or Memory Card, and plug it into the
device.
3. Select the “USB” icon or
“SD/MMC/MS/XD” icon as shown on the
screen, and then press “OK” button on the
remote control.
4. Select “FILE” icon and press “OK” button
on the remote control to enter file browser.
5. Use Up/Down/Left/Right keys to select
the firmware image file, and then press “OK”
button on the remote control to select the file.
It will then pop up a dialog box. Please use
Left/Right keys to select “V”, and then press
“OK” button on the remote control to upgrade
the firmware.
6. Please do not power off the device or do
anything else when it is upgrading the
firmware. Once it finished, it will reboot itself
automatically.