Ericsson ENMMP-X210 - Manual (Page 7)

ENMMP-X210 - User Guide
7
Chapter 3: Knowing the Remote Control
The Remote Control allows you to operate ENMMP-X210 remotely. Aim the front of the
Remote Control at the Remote Control Receiver and press the control buttons as you
would.
3.1 Installing Batteries
Remove the battery cover of remote control, put in two pieces of AAA batteries
(alkaline battery recommended) and put the battery cover back.
3.2 Remote control functions
1. Power: power on/off the device
2. Mute: mute or resume the Volume
3. PICTURE: enter PICTURE function screen
4. MUSIC: enter MUSIC function screen
5. MOVIE: enter MOVIE function screen
6. 16:9/4:3: switch between 16:9 or 4:3 display modes
7. Turn: Rotate the photo clockwise
8. Zoom In: Zoom in the image shown
9. Play/Pause: Play or Pause the media playback
10. Stop: Stop the media playback
11. / : Rewind / Fast forward
12. / : Previous / Next image, song or video title
13. Vol +/-: Increase / Decrease volume
14. Up/Down/Right/Lift: direction keys of function selection
15. OK: select and confirm
16. Exit: Exit or go back to previous function page
16. BGM: play Background Music
17. OSD: show On Screen Display
18. MENU: enter the Menu screen
19. Video Standard: switch to VGA / YPbPr / AV outputs
20. Red / Green / Blue button: buttons reserved
Note: The ENMMP-X210 supports many video output modes, including VGA, NTSC
Interlace, NTSC Progressive, PAL Interlace, PAL Progressive, NTSC Composite, PAL
Composite and HD mode. Please utilize the “Video Standard” button on the remote
control to switch video output mode to the proper one for your video display system.