Eicon Networks Diva 2430 - Manual (Page 24)

Setup: Configuring Settings via the Web Interface Page 24
• If this is the first time you have configured the device, you may need to wait up to
one minute (after making changes) before being able to access the Internet. This is
because your computer may have initially been assigned its network settings from
the Diva 2430, when the ADSL line was down and your provider’s server was not
available. If, after a minute, it is still not working, reboot your computer in order to
force a new DHCP request.
The following pages contain brief descriptions of each menu. Click on a setting name
for more information on that particular setting.
ATM Settings
The ‘ATM Settings’ menu allows you to edit the Virtual Channel (VC) connection
parameters. When you first open this menu, VC1 is displayed. The default settings
should work for the ADSL network to which you are connected; however, these
settings are the first to check if you are having problems connecting to the Internet.
To change a VC, select a VC number from the drop down menu at the top left of the
window. For a VC to be used, the ‘Enable this VC’ option must be checked.
Once you save your changes, you must reset the device (by clicking the ‘Reset’ button
on the main menu) for the new settings to take effect. (For other menus, settings take
effect immediately upon saving.)
If this is the first time you have configured the device, you may need to wait up to one
minute before being able to access the Internet. This is because your computer may
have initially been assigned its network settings from the Diva 2430, as the ADSL line
was down and your provider’s server was not available. If, after a minute, it is still not
working, reboot your computer in order to force a new DHCP request.
Note: If you are not able to access the Internet, check that your VC settings match your
provider’s specifications.