Chain lubricant – Echo CS-310 User Manual

Page 15

Advertising
background image

15

CS-310

Mixing Instructions

1. Fill an approved fuel container with half of the required

amount of gasoline.

2. Add the proper amount of 2-stroke oil to gasoline.

3. Close container and shake to mix oil with gasoline.

4. Add remaining gasoline, close fuel container, and remix.

IMPORTANT

Spilled fuel is a leading cause of hydrocarbon emissions.

Some states may require the use of automatic fuel shut-off

containers to reduce fuel spillage.

After use

• DO NOT store a unit with fuel in its tank. Leaks can occur.

Return unused fuel to an approved fuel storage container.

Storage - Fuel storage laws vary by locality. Contact your local

government for the laws affecting your area. As a precaution, store

fuel in an approved, airtight container. Store in a well-ventilated,

unoccupied building, away from sparks and flames.

Fuel Mix Chart

50:1

IMPORTANT

Stored fuel ages. Do not mix more fuel than you

expect to use in thirty (30) days, ninety (90) days

when a fuel stabilizer is added.

IMPORTANT

Stored two-stroke fuel may separate. ALWAYS

shake fuel container thoroughly before each use.

Oil tank cap

Fuel tank cap

Cap indication

Fuel/oil tanks are indicated by the following

illustrations.

CHAIN LUBRICANT

Proper lubrication of the chain while in operation

reduces friction between the chain and the guide

bar to a minimum and assures a longer service life.

• Use bar and chain oil of high quality for this

purpose.

• Do not use used or reclaimed oil to avoid vari-

ous oiler problems.

• Use ECHO bar and chain oil.

• When ECHO bar and chain oil is not available:

Use motor oil, etc.

• Use bar and chain oil of the following grades:

SAE No. 30 ....... in summer

SAE No. 10 ....... in winter or when cutting resin-

ous trees.

• When refueling, also refill chain oil.

Advertising