Routing the cables through the arm unit, Attaching the wall mount to the wall plate – Epson ELPMB27 User Manual
Page 15
15
English
3. Routing the cables through the arm unit
If you are installing ELPIU03 (sold separately), you also need to route the USB cable supplied with ELPIU03 through the
arm unit.
4. Attaching the wall mount to the wall plate
1)
Attach the hook on the arm plate to the bar on the wall plate.
Be careful not to pinch cables between the arm plate and the wall plate.
2)
Secure the arm plate temporarily using two M8 x 15 mm hexagon socket head cap bolts.
q
Route the USB cable that connects ELPIU03 to the computer so that the type B connector emerges on
the adjustment unit side.
Arm unit
USB cable for ELPIU03
Problems may occur if you use this product without routing the cables through the arm unit.
Caution
Arm unit
Arm plate
Wall plate
M8 x 15 mm hexagon
socket head cap bolts
(x2)
Bar on wall plate